Using the hand scanner
Operation indicator and warning beep
When scanning documents, check the operation indicator light.
Operation | Warning Beep | Situation | |
Indicator | |||
|
| ||
|
|
| |
Green light | No beep | The document is being scanned properly. | |
Slow flash | (Fine letter mode) | ||
| |||
|
|
| |
Green light | No beep | The document is being scanned properly. | |
Fast flash | (Standard letter mode) | ||
| |||
|
|
| |
Green light |
| The hand scanner has temporarily stopped during scanning. | |
No beep | You did not move the hand scanner for more than 30 seconds, so it has stopped scanning | ||
ON | |||
| automatically. | ||
|
| ||
|
|
| |
Red light | No beep | The hand scanner is being moved quickly. | |
ON | (The document is being scanned.) | ||
| |||
|
|
| |
Red light |
| The hand scanner is being moved too quickly. | |
1 beep | (Some parts of the document may not be scanned, or the scanned contents may be too | ||
ON | |||
| compressed.) | ||
|
| ||
|
|
| |
|
| The scanner memory is full. | |
Light OFF | 3 beeps | (The memory indicator green light will flash fast.) | |
| |||
You have scanned a document that is more than 1.5 m in length as 1 page. | |||
|
| ||
|
| Scan the document as 2 pages or more. | |
|
|
| |
Light OFF | No beep | The scanner is not in operation. | |
|
|
|
Memory indicator
Shows the amount of scanner memory being used.
Memory indicator | Memory used | |
(green light) | ||
| ||
|
| |
OFF | 0% | |
|
| |
ON | ～66% |
Memory indicator
Operation indicator
Flash slow
～99%
Flash fast
100%
22
