Installations and connections
Installing the ink film
1 Open the control panel.
1 Press here.
Control panel
2 | Open the control |
| panel until it locks. |
2
2 Insert the ink film.
1Find the “T” shaped gear (blue).
Ink film
2Insert the blue core into the right slot of the main unit.
3Insert the “T” shaped gear (blue) into the left slot of the main unit.
“T” shaped gear (blue)
Right slot
3
3
Blue core | 2 |
|
4Insert the white core into the slots shown in the picture below.
White core
5If the ink film is slack, tighten it by winding the “T” shaped gear.
“T” shaped gear (blue) | Do not be | |
slacken. | ||
|
3 Close the control panel until it locks.
4