Operating the built-in answering device
Activating the answering device
light on/flash
1 Turn the 
(Auto answer) light on by pressing 
.
2When receiving a call, a greeting message will be played and the unit will record a voice message.
•To record your own greeting message, see page 16.
Listening to recorded messages
When new messages are recorded, the 
(Auto answer) light will flash.
Press 
to listen to recorded messages.
After the messages are played back, the following will be displayed.
nTo erase the messages, press 
. ｻｲｾｲｼﾀﾖｳｹﾝｼｮｳｷｮ
nTo save the messages, press 
. ｽﾙ=
ｱｼﾅｲ=#
Listening to all of the recorded messages
Press 
(Replay/Record).
After the messages are played back, the following will be displayed.
nTo erase the messages, press 
. ｻｲｾｲｼﾀﾖｳｹﾝｼｮｳｷｮ
nTo save the messages, press 
. ｽﾙ=
ｱｼﾅｲ=#
Erasing a specific message
Press | (Flash/Clear/Erase) while listening to the |
message you want to erase, then press 
.
Erasing all of the recorded messages
1 Press | (Flash/Clear/Erase). |
ｽﾍﾞﾃｾｼｮｳｷｮｼﾏｽｶ? ﾊｲ=
ｱｲｲｴ=#
2 Press 
.
Operating the answering device from a remote location
light on
Preparation: Programming the remote operation ID
1.Press 
(Function/Edit).
2.Press 
.
3.Enter any
or #.
Example : ｱﾝｼｮｳｱ No. =1234
ｱｱｱ[ 4 ｹﾀ , ｹｯﾃｲ ] ｵｽ
4. Press | (Set). |
5.Press 
(Stop).
Operation: Listening to a recorded message from a remote location
Turn the 
(Auto answer) light on before you go out. Remote operations are available only from a touch tone telephone.
1.Call your unit.
2.Enter the remote operation ID during the greeting message.
3.Press 2 or wait 4 seconds.
•Only the new recorded messages will be played back.
•To listen to all the recorded messages, press 4 after the new messages have been played back.
17
