44

Installations and connections

Installing the ink film

1 Press here and open the control panel.3 If the ink film is slack, tighten it by
winding this gear (
orange)
.
4 Close the control panel until it locks.2 Insert the ink film.
Insert the orange core into the right
slot of the main unit.
Insert the orange
gear
into the left slot
of the main unit.
l When the unit runs out of ink film, the following message will be displayed.
Install a new ink film.
As of June 2005. Tax included.
Replacement ink film:
KX-FAN200 (30 m) 1,208