19
light on
/flash
Operating the built-in answering device
Erasing a specific message
Press (Erase) while listening to the message you
want to erase, then press (Yes).
Erasing all of the recorded
messages
2 Press .
1 Press (Function).
すべて消去しますか
？
3 Press (Set).
When not using an SD Memory Card, press (Yes).
When using an SD Memory Card, delete messages as
follows:
— To erase the main unit memory messages
and the SD Memory Card messages,
Press (Main unit+SD) (Yes).
— To erase the main unit memory messages,
Press (Main unit) (Yes).
— To erase the SD Memory Card messages,
Press (SD card) (Yes).
2 When receiving a call, a greeting message will be
played and the unit will record a voice message.
To record your own greeting message, see page 18.
Activating the answering device
1 Turn the (Auto answer) light on by pressing .
Listening to recorded messages
Listening to all of the recorded
messages
When new messages are recorded, the (Auto
answer) light will flash.
Press to listen to recorded messages.
After the messages are played back, the following will be
displayed.
To erase the messages, press
.
To save the messages, press
.
Press (Playback) when new messages are not
recorded.
When new messages are recorded, only the new
messages will be played back.
After the messages are played back, the following will be
displayed.
To erase the messages, press (Yes).
To save the messages, press (No).
再生した用件を
消去しますか
？
すべて消去しますか
？
means recorded
date and time : Thursday, Oct. 2, 10:05
再生中
1/ 2
件
10
月
2
日
（
木
）10：05
If an SD Memory Card is available(inserted), voice
messages will be recorded to the SD Memory Card.
(See page 22.)
If an SD Memory Card is inserted, the following
variations may occur:
（
SD
）
: Playing a message in the SD Memory
Card.
（
未保存
）
: Playing a message in the main unit that
is not saved to any SD Memory Card.
Blank : Playing a message in the main unit that
has been saved to an SD Memory Card.
KX-PW607DL_QG.indb 19 2008/01/24 16:09:02