To store in a Lower memory location | Panasonic KX-T2375ALW guide

Ò

To store in a LOWER memory location

1 Press (PROGRAM).

2	Enter a phone number, up to 22 digits.
2	³If you enter a wrong number, press
	(PROGRAM) and start again from step 1.

3 Press (AUTO/LOWER).

4 Press one of the one-touch auto dial buttons.

³A long beep sounds.

³The unit will return to the standby mode.

³If 3 beeps sound, the number entered in step 2 may be over 22 digits. Lift the handset and place it on the cradle to return to the standby mode, and start again from step 1.

³If a pause is required for dialling, press (PAUSE) where needed. Pressing (PAUSE) counts as one digit (p. 21).

To erase a stored number

1 Press (PROGRAM).

2	If the phone number is in an UPPER
	memory location, press the one-touch

auto dial button for the phone number to be erased.

OR

If the phone number is in a LOWER memory location, press (AUTO/LOWER), then press the one-touch auto dial button for the phone number to be erased.

³A long beep sounds.

³The unit will return to the standby mode.

³When using the Dial Lock (p. 25) or Call Restriction feature (p. 26), you cannot erase a phone number in the EMERGENCY button.

Advanced Operation

19

Image 19

Panasonic KX-T2375ALW operating instructions To store in a Lower memory location, If the phone number is in an Upper

Contents

Model No. KX-T2375ALW Serial No Date of purchase Accessories includedBefore Initial Use For your future reference Contents Headset Jack p Display p Ringer Selector p VolumeLocation of Controls DIAL\LOCK Button p Display Installing the Batteries Settings After connection, lift the handset to check for a dial tone Connecting the Handset/Telephone Line Cord Connecting a Communication Device Press Mute Press Program to store the settingProgramming Summary of Preparations Make sure that a call is not put on hold You can select AM/PM or 24-hour clock by programming Time Adjustment Press 1 to Setting the LCD ContrastSelecting the Ringer Volume Press Wall Template Wall MountingLocks, so the tab holds the handset To redial the last number dialled Using the speakerphoneUsing the speakerphone Press SP-PHONE/HEADSETÛ Making Calls Press Hold To increase, press Volume . To decrease, press VolumeTo put a call on hold To release the hold Talk into the MIC microphone Answering Calls Press a memory station number 0 to Speed DiallerStoring Phone Numbers in Memory Enter a phone number, up to 22 digits To erase a stored number Dialling a Stored Number To store in an Upper memory location One-Touch DiallerPress one of the one-touch auto dial buttons If the phone number is in an Upper To store in a Lower memory locationMemory location, press the one-touch Lift the handset or press SP-PHONE/HEADSET From an Upper memory locationFrom a Lower memory location Memory card Muting Your Conversation Special FeaturesHow to Use the Pause Button For Analog PBX Line/Long Distance Service Users To turn OFF, press To turn ON, press Turning Music Played During the Hold Selecting the recall time Recall ButtonPress a dialling button 1 to Number Setting the PIN CodeEnter a new PIN code using a 4-digit Press Mute Enter the current PIN code. Ex is entered Enter the PIN code p To cancel the dial lockDial Lock To set the dial lock To set the call restriction Call RestrictionEnter the PIN code p . Ex. Your PIN code is To cancel the call restriction Using the Optional HeadsetConnecting the Optional Headset to the Unit Making/Answering Calls Make sure to install the batteriesTo adjust the headset receiver volume 4 levels While using the headset, press Volume or Battery Precautions Battery Replacement Before Requesting Help ProblemRemedy Problem Remedy Installations Environment Safety Instructions Useful Information Instructions to customer Important Information Service difficulties PQQX13367ZA-BM F0102-0D