Setting the PIN Code, Number, Ex is entered

ÒSpecial Features

Setting the PIN Code

A 4-digit PIN Code (Personal Identiﬁcation Number) prevents unauthorised persons from using your unit. The PIN Code is required for the dial lock and call restriction to be set or cancelled. The factory preset PIN code is “1111”.

Make sure that a call is not put on hold.

Press (PROGRAM).

Press (MUTE).

Press (5).

Enter the current PIN code. (Ex. “1111” is entered.)

Press (PROGRAM).

³If a correct PIN code is entered, a beep will sound.

³If a wrong PIN code is entered, 3 beeps

will sound. Enter the correct PIN code and press (PROGRAM).

³To return to the standby mode, lift the handset and hang up.

6	Enter a new PIN code using a 4-digit
6	number.
	(Ex. “1234” is entered.)
7	Press (PROGRAM).
7	³A long beep sounds.

³The unit will return to the standby mode.

Please write down your PIN code. If you forget your PIN code, consult your nearest Panasonic service centre.

Page 24

Image 24

Panasonic KX-T2375ALW Setting the PIN Code, Press Mute Enter the current PIN code. Ex is entered, Number

Contents

Model No. KX-T2375ALW Accessories included Before Initial UseFor your future reference Serial No Date of purchase Contents Volume Location of ControlsDIAL\LOCK Button p Headset Jack p Display p Ringer Selector p Display Settings Installing the Batteries Connecting the Handset/Telephone Line Cord After connection, lift the handset to check for a dial tone Connecting a Communication Device Press Program to store the setting Programming Summary of PreparationsMake sure that a call is not put on hold Press Mute Time Adjustment You can select AM/PM or 24-hour clock by programming Setting the LCD Contrast Selecting the Ringer VolumePress Press 1 to Wall Mounting Wall TemplateLocks, so the tab holds the handset Using the speakerphone Using the speakerphone Press SP-PHONE/HEADSETÛMaking Calls To redial the last number dialled To increase, press Volume . To decrease, press Volume To put a call on holdTo release the hold Press Hold Answering Calls Talk into the MIC microphone Speed Dialler Storing Phone Numbers in MemoryEnter a phone number, up to 22 digits Press a memory station number 0 to Dialling a Stored Number To erase a stored number One-Touch Dialler To store in an Upper memory locationPress one of the one-touch auto dial buttons To store in a Lower memory location If the phone number is in an UpperMemory location, press the one-touch From an Upper memory location From a Lower memory locationMemory card Lift the handset or press SP-PHONE/HEADSET Special Features How to Use the Pause ButtonFor Analog PBX Line/Long Distance Service Users Muting Your Conversation Turning Music Played During the Hold To turn OFF, press To turn ON, press Recall Button Selecting the recall timePress a dialling button 1 to Setting the PIN Code Enter a new PIN code using a 4-digitPress Mute Enter the current PIN code. Ex is entered Number To cancel the dial lock Dial LockTo set the dial lock Enter the PIN code p Call Restriction To set the call restrictionEnter the PIN code p . Ex. Your PIN code is Using the Optional Headset To cancel the call restrictionConnecting the Optional Headset to the Unit Make sure to install the batteries To adjust the headset receiver volume 4 levelsWhile using the headset, press Volume or Making/Answering Calls Battery Replacement Battery Precautions ProblemRemedy Before Requesting Help Problem Remedy Safety Instructions Installations Environment Useful Information Important Information Instructions to customer Service difficulties PQQX13367ZA-BM F0102-0D

Setting the PIN Code

Make sure that a call is not put on hold.

Press (MUTE).

Enter the current PIN code. (Ex. “1111” is entered.)

Enter a new PIN code using a 4-digit

number.

(Ex. “1234” is entered.)