Setting the LCD Contrast, Press 1 to

Setting the LCD Contrast

You can select the LCD contrast level from 1 to 4 by programming. Your phone comes from the factory set to 3.

Make sure that a call is not put on hold.

1 Press (PROGRAM).

2	Press (MUTE).
3	Press (7).
3	³The current setting is displayed.
4	Press (1) to (4).
4	³Each time you press a button, the level
	will change on the display.
5	Press (PROGRAM).
5	³A long beep sounds.

³The unit will return to the standby mode.

Selecting the Ringer Volume

You can select the ringer volume to HIGH, LOW or OFF. Your phone comes from the factory set to HIGH.

RINGER Selector:

Set to HIGH, LOW or

OFF.	OFF	HIGH
³When set to OFF, the		LOW
unit will not ring.	RINGER

Preparation

Page 11

Image 11

Panasonic KX-T2375ALW operating instructions Setting the LCD Contrast, Selecting the Ringer Volume, Press 1 to

Contents

Model No. KX-T2375ALW Serial No Date of purchase Accessories includedBefore Initial Use For your future reference Contents Headset Jack p Display p Ringer Selector p VolumeLocation of Controls DIAL\LOCK Button p Display Installing the Batteries Settings After connection, lift the handset to check for a dial tone Connecting the Handset/Telephone Line Cord Connecting a Communication Device Press Mute Press Program to store the settingProgramming Summary of Preparations Make sure that a call is not put on hold You can select AM/PM or 24-hour clock by programming Time Adjustment Press 1 to Setting the LCD ContrastSelecting the Ringer Volume Press Locks, so the tab holds the handset Wall MountingWall Template To redial the last number dialled Using the speakerphoneUsing the speakerphone Press SP-PHONE/HEADSETÛ Making Calls Press Hold To increase, press Volume . To decrease, press VolumeTo put a call on hold To release the hold Talk into the MIC microphone Answering Calls Press a memory station number 0 to Speed DiallerStoring Phone Numbers in Memory Enter a phone number, up to 22 digits To erase a stored number Dialling a Stored Number Press one of the one-touch auto dial buttons One-Touch DiallerTo store in an Upper memory location Memory location, press the one-touch To store in a Lower memory locationIf the phone number is in an Upper Lift the handset or press SP-PHONE/HEADSET From an Upper memory locationFrom a Lower memory location Memory card Muting Your Conversation Special FeaturesHow to Use the Pause Button For Analog PBX Line/Long Distance Service Users To turn OFF, press To turn ON, press Turning Music Played During the Hold Press a dialling button 1 to Recall ButtonSelecting the recall time Number Setting the PIN CodeEnter a new PIN code using a 4-digit Press Mute Enter the current PIN code. Ex is entered Enter the PIN code p To cancel the dial lockDial Lock To set the dial lock Enter the PIN code p . Ex. Your PIN code is Call RestrictionTo set the call restriction Connecting the Optional Headset to the Unit Using the Optional HeadsetTo cancel the call restriction Making/Answering Calls Make sure to install the batteriesTo adjust the headset receiver volume 4 levels While using the headset, press Volume or Battery Precautions Battery Replacement Before Requesting Help ProblemRemedy Problem Remedy Installations Environment Safety Instructions Useful Information Instructions to customer Important Information Service difficulties PQQX13367ZA-BM F0102-0D

Panasonic KX-T2375ALW Setting the LCD Contrast, Selecting the Ringer Volume, Press 1 to

Models: KX-T2375ALW

Setting the LCD Contrast

Make sure that a call is not put on hold.

Press (MUTE).

Press (7).

Press (1) to (4).

Selecting the Ringer Volume