Toshiba IP5000 manual Setting the IP Telephone Headset Transmit Volume, 110

Administrator Programming

Setting the IP Telephone Headset Transmit Volume

Setting the IP Telephone Headset Transmit Volume

1.Press 3+6+9+ (simultaneously).

2.Press #.

3.Press

4.Press the Feature Buttons to turn the LEDs On/Off for the desired volume transmission level (see Table 16).

Table 16 Volume Level Transmitted from Headset Microphone

	LEDS		Transmit Level
FB3	FB2	FB1
ON	ON	ON	Level 7 (min.)
ON	ON	OFF	Level 6
ON	OFF	ON	Level 5
ON	OFF	OFF	Level 4
OFF	ON	ON	Level 3 (initial value)
OFF	ON	OFF	Level 2
OFF	OFF	ON	Level 1
OFF	OFF	OFF	Level 0 (max.)

5.Press FB4 for headset voice output in speakerphone mode (LED On = with, LED Off = without).

6.Press to set the above data.

7.Go off-hook and hang up.

Viewing IP Telephone Terminal Information

1.Press 3+6+9+ (simultaneously).

2.Press 1, then press .

3.Press FB1 to view IPT firmware version (application and boot versions, read only).

4.Press FB2 to view IPT MAC address (read only).

5.Lift the handset off-hook / on-hook to save the settings.

Note FB03 will display the Regional Code (default 0); FB04 will display the connecting IPU address.

110 Strata CIX IP5000-series Telephone UG 10/08