Administrator Programming
IP5131-SDL Settings
This section contains instructions to configure the
Configurations
Press +3+6+9 (simultaneously) to display the IP Configurations main screen.
To access any of the screens that relate to an item on the Configurations screen
Press the soft key that corresponds to the item. The details pertaining to that item display.
Note The following table explains each of the items
displayed on the Configurations screen.
ITEM | INFORMATION DISPLAY |
IP Configurations
Term Info | Key Repeat | |||
Network |
| Net Diag | ||
Advance |
| Factory | ||
Sound |
| Initialize | ||
Others |
|
|
| |
|
|
| Reset | |
|
|
|
|
|
| Config |
|
|
|
|
|
|
|
|
Term Info
Network
Displays the Software Version, the MAC address, the Regional Code and xIPU address. You can press the EXIT soft key to go back to the IP Configurations screen.
Note This screen is for display only and you cannot make any changes to the settings.
Page 1:Displays or sets the DHCP, IP Address, Subnet, the default gateway, station information and LIPU Address.
Page 2:Displays or sets node, IPU Mode, Primary IPU, Secondary IPU and Port Settings.
Page 3:Displays or sets Auto Login Mode and Auto Login password.
114 | Strata CIX |