The Basics
Message Waiting
Turning On/Off MW LED on Another Extension
If you call an extension and it’s busy or there is no answer, you may be able to light that extension’s Message Waiting LED and enable that extension to call you back. The ability to perform this feature is set in system programming.
1. | Dial an internal extension. You hear busy tone or there’s no answer. |
| ||
2. | Press | or 7. The Msg LED flashes red on the called telephone. At your | ||
| telephone, the Msg LED lights steady red and the LCD shows the station number | |||
| where you set a Message Waiting light. Example: “MW SET TO 3620.” |
| ||
| If you decide to cancel the Message Waiting light at this point, press | or 7 | ||
| again while |
| ||
3. | Press | . Your Msg LED turns Off. The Msg LED on the called telephone | ||
| flashes until the called party presses the flashing | button which calls you | ||
| back. |
|
|
|
4. To turn Off a Message LED that you have set on another extension, press #64 plus
the extension number that has the message light set. Then press or hang up to release your telephone. Your LCD shows the extension and “MW CANCEL.”
...or dial the extension that you set the Message LED on, then press 77. Then press 
or hang up to release your telephone.
Strata CIX | 27 |
