Toshiba IP5000 manual 123, CIX System /IPU Address Mode, CIX System/IPU Address Screen

CIX System /IPU Address Mode

1.From the IP Configurations screen, choose Network > > IPU Mode.

2.Press the Manual or Broadcast soft key to change the set value. The value set is underlined in the display.

3.Press the Set soft key to accept the change

...or press the Cancel soft key to cancel the change and go to the Network Setting screen [2/3].

Administrator Programming

IP5131-SDL Settings

IPU Mode

Manual

Broadcast

[Set][Cancel]

Config

CIX System/IPU Address Screen

There are two IPU’s that can be setup for an IP5000-series telephone P-IPU is the Primary IPU (the first address, the phone will try to register to).

S-IPU is the Secondary IPU (the second address the phone will try to register to if the primary IPU cannot be reached.

1.From the IP Configurations screen, choose Network > > x-IPU. The Primary or Secondary IPU address displays (shown right).

2.Follow the steps “To change settings on the screen” on page 120.

Primary IPU IP

192.168. 0. 77			:Current
			:New
	Backspace = Vol-Down
	[Set]		[Cancel]
		Config

Strata CIX IP5000-series Telephone UG 10/08 123