Toshiba IP5000 manual Two ways to turn Off a Message LED are, Method

Feature Operations

Message Waiting

Turning On/Off MW LED on Another Extension

When an extension is called, the calling party can choose to send a message to the called party. This is a notification to say that a call has been missed and the calling party would like to be called back.

By sending a message to another extension you turn on their Msg LED.

1. Dial an internal extension. You may hear ringing or busy tone.

2. Press or 7. The Msg LED flashes red on the called telephone. At your telephone, the Msg LED lights steady red and the LCD shows the station number where the Message Waiting light was sent to.

If you decide to cancel the Message Waiting light at this point, press or 7 again while ring-over tone is playing and the light will be cancelled, or if you want to cancel the message later, call the telephone you set the message on and press 7 twice.

3. Press Spkr. Your Msg LED turns Off. The Msg LED on the called telephone

flashes until the called party presses the flashing button which calls you back.

4. Turn off the Message LED.

The two ways to turn Off a Message LED are

Method 1

1.Press #64 plus the extension number that has the message light set.

2.Press or hang up to end the call.

Method 2

1.Dial the extension that has the Message LED on.

2.Press 77

3.Press or hang up to release your telephone.

Strata CIX IP5000-series Telephone UG 10/08 63