The Basics

Answering a Call

Answering a Call

There are several ways to answer a call:

Handset

When the telephone is programmed for Ringing Line Preference, pick up the handset and the telephone automatically answers the ringing line.

... or press the button associated with the ringing line (flashing green LED).

Speaker

When the telephone is programmed for Ringing Line Preference, press and the ringing line is answered.

... or press the button associated with the ringing line (flashing green LED). Once connected, continue using the speakerphone or lift the handset.

Handsfree Answerback

With speakerphone enabled, the telephone may be programmed for Handsfree Answerback. The called party hears a single long tone, followed by the caller’s voice. Begin hands free conversation. If Handsfree Answerback were not programmed, the called party could hear the calling party speak but would not be able to answer them without answering the call manually.

Notes

The extension LED flashes green, the Microphone LED lights steady red and the Speaker LED flashes Red.

In order to perform any additional functions with this call (like a transfer or hold) the call must be properly answered to gain full call control. Perform the same steps you normally would to answer a call: press the Spkr button, the flashing DN button or lift the handset.

Handsfree MIC setting needs to be enabled by your System Administrator.

Strata CIX IP5000-series Telephone UG 10/08

23

Page 41
Image 41
Toshiba IP5000 manual Answering a Call, Speaker, Handsfree Answerback