Toshiba IP5000 manual LED Indicator Details, Led

The Basics

Message Waiting

LED Indicator Details

Each line and Programmable Feature Button has a LED next to it which indicates the status of the line or feature associated with the button. Line LEDs light red or green and flash at varying rates to indicate call status (see Table 6).

Table 6	LED Indicators
LED		Your Station (Green)	Other Station (Red)
		Interval Rates
Extension In-Use		2 seconds On, 1/8 second Off	steady
(access outside line)		— 1/8 second On/Off
Incoming Call		1 second on at 10 pulses/	one second On/Off
(while ringing)		second —1 second Off
Hold (outside line) If using Pooled Line		4 pulses/second for 1/8	1/2 second On/Off
Grp, the hold indication is only at the		second On/Off
station that places the call on hold.
Hold – Consultation
(during consultation/transfer to another		10 pulses/second	steady
station)
Hold – Exclusive (outside line)		10 pulses/second	steady
Hold – Recall		1 second at 2 pulses/second,	flashes
(when held call recalls your idle station)		1 second at 10 pulses/second
Hold – Exclusive Recall		1 second at 2 pulses/second,	steady
		1 second at 10 pulses/second
Internal Call		Your extension button flashes	[SDN] red flashing or
		10 pulses/second—1 second
(while station ringing)			green ringing
		Off
Busy Station Transfer		4 pulses/second, 1/8 second	3/4 second on, 1/8
(outside call transferred to your busy
		On/Off	second Off
station from a designated station or AA)
After disconnecting first call...		10 pulses/second	2 pulses/second
Conference		10 pulses/second	steady

Note LEDs on the telephone flash at different speeds depending on the function performed. Flash rates can be found under “LED Indicator Details” on page 28.

28 Strata CIX IP5000-series Telephone UG 10/08