The Basics

On a Call

On a Call

While on a call you can perform the following:

Switching Between Handset and Speakerphone

Press and place the handset on-hook to switch from handset to speakerphone mode.

Take the handset off-hook to switch from speakerphone to handset mode.

Microphone (Mic/Mute) Button

This button toggles between Mic and Mute. When Mic button is lit, handsfree communication is supported, when Mic is pressed again and light is off, Mute is enabled and mutes both the microphone and the handset.

Hold

To place a call on hold, press . Your LCD shows the line on hold. The held Line’s LED flashes green while appearances of the line at other stations flash red.

To return to the held call, press the flashing held Line button.

If you do not return to the held call within a specified time, it rings back to your telephone. The call remains camped-on to your station.

If the held party hangs up, the call is released.

See the Call Pickup section to pick up a call on hold from another extension.

Exclusive Hold

This feature enables you to place a call on hold so that only you can retrieve it.

While on a call, press twice. That line’s LED flashes green while appearances of the line at other stations are steady red (in use).

24

Strata CIX IP5000-series Telephone UG 10/08

Page 42
Image 42
Toshiba IP5000 manual On a Call, Switching Between Handset and Speakerphone, Microphone Mic/Mute Button, Exclusive Hold