Toshiba IP5000 manual Initialise, 148

Administrator Programming

IP5131-SDL Settings

Initialise

Select Configuration > Initialise. The Initialise screen displays.

The general operation on the Initialise screens is as follows:

•To view details of an item displayed on the screens above, press the soft key that corresponds to that item.

•You can toggle between all the items found on the Initialise screen, except All Data. The item selected is underlined.

Initialize

All Data			LCD
Network		Key Repeat
Sound			Others
Browser			Factory
[Exec]			[Cancel]
	Config

•Selecting the All Data soft key selects all the items displayed on the Initialise screen and all items are underlined.

Important! Pressing the “All Data” key twice will not cancel the selection.

•Pressing the EXEC soft key while “Network” is displayed underlined will initialise the selected item and will rewrite the NV-RAM data and cause the screen to move to the Resetting Selection Screen. (The Resetting Selection Screen will be described later.)

•Pressing the EXEC soft key any item except “Network” is displayed underlined will rewrite the NV-RAM data and go to the Configuration screen.

•If no setting change is made to the items and the EXEC key is pressed, the NV- RAM data will not be rewritten and goes to the Configuration screen.

•Pressing the CANCEL soft key will not initialise and goes to the Configuration screen.

•Table 17 on page 116 shows the Initial values of Settings:

148 Strata CIX IP5000-series Telephone UG 10/08