Administrator Programming

IP5131-SDL Settings

resulted in an input error will be displayed as it is when moving to the Address Setting Screen.)

5.Select the Cancel soft key to cancel the intended setting change and to move to the Loop Back Test Screen without rewriting the NV-RAM data.

Ping Start and Stop

From the Loop Back Test screen, press the Ping Start soft key. The Pinging Screen displays (shown right) and Pinging starts.

Notes

Pinging is attempted ten times on the Pinging Screen and is stopped automatically. The screen will move to the Loop Back Test Screen. The result is displayed in the third line of the Loop Back Test Screen as “Last result n/10 (successful operations/attempts made).”

Pinging

Ping to 192.168.0.77

Executing 5/5

Ping Stop

[Exit]

Config

During Ping execution, the progress is displayed by showing “Executing n/10 (number of successful operations/number of trial operations)” in the third line on the Pinging Screen.

Pressing the “Ping Stop” or “Exit” key on the Pinging Screen will stop Pinging and cause the screen to move to the Loop Back Test Screen. Then the result will be displayed.

144

Strata CIX IP5000-series Telephone UG 10/08

Page 162
Image 162
Toshiba IP5000 manual 144, Ping Start and Stop