Toshiba IP5000 manual 103, Feature Access Codes Feature Access Code Sequences

User Programming

Feature Codes

Table 14			Feature Access Codes (continued)
Feature				Feature Access Code Sequences1
Speed Dial (Storing an SD number)				#66 + nnn + Phone No.3 + #
Station2
				nnn = 100~199 SD bin numbers
System		2		#66 + nnn + Phone No.3 + #
				nnn = 200~999 SD bin numbers
Speed Dial (Dialling a stored SD number)
Station	2			4 + nnn
				nnn = 100~199 Station SD bin numbers
System		2		4 + nnn
				nnn = 200~999 System SD bin numbers
Start Application				#18
Travelling Class Override
Enter Code				#471, then dial number (enter LCR code if required)
Change Code				#69 + Index Number + old Code + # + new Code + #
Uniform Call Distribution
Login from Agent Station				#6061
Logout from Agent Station				#6062
Login to Agent Station—another				#6161
Station
Logout to Agent Station–another				#6162
Station
User Programming Mode				#9876
Voice Mail (VM)
Direct Transfer to Voice Mail				While on a call, press			+ #407. Dial VM mailbox
				number (usually Ext.		+ #.
					Number)
Volume Control - Beep				With handset off-hook, press #6101. Press Vol				or .
Volume Control - Ringing				With handset on-hook, press #6102. Press Vol				or .

1.If you have “hot dialling,” you do not need to press Ext. button as part of the sequence.

2.Stations must be assigned/enabled SD capabilities in system programming by an Administrator in Program 200-30 (System SD) and Program 200-35 (Station SD).

3.Refer to Table 10 on page 73 to see how to enter * and # into a speed dial number.

4.If your telephone does not have a Spdial button, press the * button, then dial the three digit Speed dial number (nnn).

Strata CIX IP5000-series Telephone UG 10/08 103