![](/images/new-backgrounds/1305199/305199275x1.webp)
Administrator Programming
IP Address
1.Press +3+6+9 (simultaneously).
2.From the IP Configurations screen, choose Network > IP Addr. The IP Address screen displays (shown right). The current IP Address displays.
To change settings on the screen
The following applies to the IP Address, Subnet Mask, Default Gateway, and Primary DNS Server.
1.Use the dial pad (1~0, *) to enter a new IP address.
Use * on the dial pad to enter a period (.) in an IP address.
IP Address
192.168.0.10 :Current :New
Backspace =
[Set][Cancel]
Config
2. Press the Set soft key to select the setting change and go |
| |
Errors | ||
back to the Network Setting Screen. | ||
| ||
On the Network Setting Screen, the item you changed | Illegal Data | |
| ||
will be underlined in the display (in this case the IP |
| |
Address). |
|
3.Pressing the Set soft key can give you an Error Screen if you incorrectly entered the address.
4. Press the Ok soft key on the Error Screen to correct the
[Ok]
entry. Five seconds after the Error Screen displays, the Config
screen automatically goes back to the appropriate setting screen (in this case the IP Address) and the address that resulted in an error will be displayed.
5.Press the Cancel soft key to cancel the setting change and to go to the Network Setting screen.
120 | Strata CIX |