Toshiba IP5000 manual Initialising the IP Telephone, 105

Administrator Programming 8

Initialising the IP Telephone

CAUTION! If you initialise the IP telephone, all settings return to default.

1.Press 3+6+9+ (simultaneously).

2.Press Vol ▲.

3.Press

Note Steps 4~6 are optional.

4.Press FB01 to initialise the telephone’s function settings (LED On = initialise, LED Off = don’t initialise). See “IP Telephone Function Settings” on page 109 for details.

5.Press FB02 to initialise LCD contrast setting (LED On = initialise, LED OFF = don’t initialise).

6.Press FB03 to initialise the telephone’s IP network connection settings (LED On = initialise, LED Off = don’t initialise). See “IP Setup Instructions” for details.

Note When initialising an IP5122-SDC telephone, press FB4 to initialise the local exchange line setting.

7.Press again to complete the initialisation process.

8.Go off-hook and hang up.

Strata CIX IP5000-series Telephone UG 10/08 105