138, Key Repeat OFF/ON | Toshiba IP5000 instruction

Administrator Programming

IP5131-SDL Settings

Key Repeat

From the IP Configurations menu, select Key Repeat. The Key Repeat Settings screen displays.

The general operation on the Key Repeat screens is as follows:

•To view details of an item displayed on the screens above, press the soft key that corresponds to that item.

•Press the Set soft key to rewrite the NV-RAM data if any setting of an item on this screen is changed.

Key Repeat Setting

	Off / On Setting	:On
	Repeat Delay Timer	:1


	Repeat Delay Timer	:1

[Set][Cancel]

Config

•Press the Cancel soft key to cancel all the intended setting changes in the minor items and to go to the Configurations Screen without rewriting the NV-RAM data.

Key Repeat OFF/ON

1.From the IP Configurations menu, select Key Repeat > Off/On Setting. The Off/on Setting screen displays.

2.Press the On or Off soft keys to change the set value.

3.Press the Set soft key to accept the change.

...or press the Cancel soft key to cancel the change.

The changed setting is underlined in the Key Repeat Setting screen display.

Off/On Mode

On

Off

[Set][Cancel]

Config

138	Strata CIX IP5000-series Telephone UG 10/08

Image 156

Toshiba IP5000 manual 138, Key Repeat OFF/ON

Contents

IP5000 Series Featurephone User Guide Publication Information Compliance Statement License Agreement Warranties for NON-TOSHIBA Branded Third Party Products This page is intentionally left blank Contents SoftIPT Feature Operations Iii Answering a All Call Emergency ADM/DSS Console Administrator Programming Appendix B Hardware Connections Vii Viii Introduction How to Use This Guide Arial Related Documents/Media Grand Tour Grand Tour IP5000-series telephone upgrade options include IP5000-series Telephone Overview Fixed Buttons Layouts Red LED must be on in order for button to function Dial on Programmable Feature Buttons Key Strip LCD Line LCD Display Browser Your extension number Soft Keys ›BILL DAN JOE Next Call Back Cncl Grand Tour Volume Control To adjust the handset volumeCustomising Your Telephone To adjust handset Beep Tone To adjust the LCD contrast on the backlit telephonesTo adjust the LCD contrast on the Add-on Module LCD Contrast Brightness Control To change the LCD back light brightnessTo change the LCD backlight brightness for IP5131-SDL To change Backlight Settings Backlight On/Off Keystrip Labels Ring TonesTo program LCD Keystrip Labels To set distinctive ringing Dial Pad and Button Beeps Speakerphone/Microphone Sensitivity Adjustment Telephone Terminology Making a Call HandsetSpkr Button Hot Dialling To access the Directory Dial Directory Answering a Call SpeakerHandsfree Answerback Switching Between Handset and Speakerphone On a CallMicrophone Mic/Mute Button Hold Automatic Hold Consultation Hold Message Waiting Responding to a Lit Msg LED Turning On/Off MW LED on Another Extension LED Indicator Details LED SoftIPT SoftIPT Icons Tested PDAs Flexible Buttons Liquid Crystal DisplayLine Buttons LCD Control Buttons Switching a Call to Your Headset Basic SoftIPT FunctionsStart the SoftIPT Making a Call Using the Directory to Call Creating a Directory Labeling Feature Buttons To change Feature Button Labels on the SoftIPT Account Code Calls Verified/Non-Verified Account Codes To dial using Forced Account Codes Forced Account Codes To dial using the Account Code button To enter an Account Code using access codesVoluntary Account Codes Verified/Non-Verified Advisory Messages To set an advisory messageTo clear the registered message Alarm Notification Button When the Alarm Notification button displaysTo cancel Automatic Busy Redial Automatic Busy Redial To cancel ACB Automatic CallbackTo set Automatic Callback To enable background music on your telephone speaker To cancel background music on your telephone speakerBackground Music To change the BGM source 1~15 assigned to the BGM button Call Forward SystemStation Call Forward Settings Station Call Forward Categories Station Call Forward Procedures To use the Call Forward button sequence Call Forward Examples Call History To view Call History Call Park Orbits To park a call Call Pickup Group PickupRinging, Page or Held Call Pickup To retrieve a parked call To perform Call Pickup To transfer using the button Call TransferTo perform Call Transfer Immediate Call Waiting To transfer a call directly to Voice Mail VMTo transfer a call directly to VM with a DSS button Caller ID Conference CallsTo view saved Caller ID information To conference calls Adding Voice Mail to a Conference To transfer conference controlTo hold a conference call Supervising a Tandem Call Conference Add/Split/Join/Drop To add an Incoming call to the Conference To Split from a conferenceTo Drop the Split party from a conference Direct Inward System Access Disa Direct Station Selection Buttons HotlineTo connect directly to another station’s extension Do Not Disturb To activate DND on your Primary extensionTo activate DND on a non-Primary extension To deactivate DND Setting DND for Another Extension Door Locks Door Phones To answer a door phone call Echo Cancellation Emergency CallEmergency Monitoring Station To call/monitor a door phone Emergency Ringdown Language CodesTo change the Language Display Responding to a Lit Msg LED Two ways to turn Off a Message LED are Method Microphone Cut-Off To turn the microphone ON/OFF Off-hook Call Announce To make an OCA callTo answer a Handset OCA call To answer a Speaker OCA call Override Calls Busy OverrideDo Not Disturb Override To use Busy Override Class of Service Override Executive OverrideDestination Restriction/Traveling Class Override Paging Privacy OverrideAnswering a To make a Group All Call EmergencyTo make an All Call To answer an All Call To set/cancel Privacy PrivacyRedial To use Privacy Release Making a Call Using Speed Dial Speed DialTo use personal Speed Dial Storing a System/Station Speed Dial Number Nnn = 200~999 System SD numbers Advanced Speed Dial Operation Special CharactersLong SD Numbers Storing Personal Speed Dial Names To assign Station Speed Dial names Press . The Speed Dial name is now programmed Time and Date Setting Local To change the DateTo change the time Tone First / Voice First Signalling Tone First SignallingVoice First Signalling To change the signalling method while placing the call Tone/Pulse Dialling To change Tone Dialling Uniform Call Distribution Login/Logout ADM/DSS Console Add-on Modules ADM Buttons and LEDs Adding an ADM Keystrip Labels DSS Console DSS ButtonsCalling a Station Transferring to an Idle Station To transfer a call to an idle station Call Transfer with Camp-on Call Answering Outside LineSpeed Dial To transfer call to a busy station Paging Call Forward Override DSS OverrideNight Transfer Button To override call forward with your DSS Console This page is intentionally left blank Recommended Headsets Headset and Handset Interactions Auto or Carbon Setting To change the setting from Auto to Carbon Headset Transmit Level Adjustments SLT Handset Level Adjustments To change the Carbon Setting Press 3+ 6+ 9+ Headset and Handset Operation User Programming Programming Feature Buttons Programmable Feature Button CodesUser Programming Mode Setting/Changing a Programmable Feature Button’s Function Programmable Feature Button Codes One Touch Buttons Changing a One Touch Button Setting/Changing a Personal Speed Dial Code To Use a One Touch ButtonExample of Special Character Usage Feature Codes 100 Feature Feature Access Code Sequences 101 102 Table in Advisory Messages on page 38 . Hang up Feature Access Codes Feature Access Code Sequences 103 104 Initialising the IP Telephone 105 IP Setup Instructions To enter the PasswordTelephone Setup 106 To manually set up the Vlan ID 107 Initial Start-up 108 IP Telephone Function Settings 109 Setting the IP Telephone Headset Transmit Volume Viewing IP Telephone Terminal Information110 Reset Factory Default Settings Handset VolumeTo reset the LCD settings to Factory defaults 111 LCD Backlight Setting LCD Backlight Brightness Control112 Handset / Headset Side Tone Volume Setting LCD Contrast Setting113 IP5131-SDL Settings Configurations114 115 116 Minor items Initial value 117 ADM Debug / ADM Network Settings To access the Network Setting screens118 Dhcp Server Settings 119 To change settings on the screen 120IP Address Default Gateway Address 121Subnet Mask 122 Station IDTo Change or Add Information on this screen Node Number CIX System /IPU Address Mode 123CIX System/IPU Address Screen Port Setting Auto Login Mode For IP MobilityAuto Login Password 124 Advanced Network Settings To access the Advanced Network Setting screens125 126 IP Address for Primary DNS Domain Name ServerIP Address for Secondary DNS 127 GRQ Port NumberRRQ Port Number Application Server Address 128 3rd 4th 129 130 External Administration User ID Setting External Administration Password SettingTo change or add a new password 131 132 Dynamic Port BaseVlan Virtual LAN Phone Vlan ID 133 PC Port TypePC Port Vlan ID Sound Settings To access the Sound Setting screens134 Headset Tx Control Setting Screen 135 Headset Tx Volume Setting Screen Handset Rx Output Setting136 To Change Information on this screen Headset Tx and Rx Volume Side Tone ModeSide Tone Volume 137 Key Repeat 138Key Repeat OFF/ON Repeat Delay Timer and Repeat Rate Timer 139 Other Setting Language Mode Setting140 Input Timer Mode Setting Screen Input Timer Value Setting Screen141 Backlight Mode Screen Backlight Timer142 Backlight Brightness Setting Ping Send-to Address Loop Back Test143 144 Ping Start and Stop ADM/DEBUG Mode Screen Factory145 146 Display/Key Test Display Mode 147 Initialise 148 Reset 149 150 ReferencesA 151 Feature Button Sequence 152 153 References 154 References 155 ACB Button Labels 156 157 Additional Messages Waiting 158 LCD User Default Can 159 160 ACD IP5000-Series Telephone Tilt Angles 161 162 Hardware Connections Connector Icons 163 Wiring 164 User Notes 165 166 Selv BIOU1A 167 EMC Compliance 168 Equipment details Strata CIX40 169 Equipment details Strata CIX670 170 171 Network Planning Information 172 Dtmf B 173 174 Index 175 176 Disa 177 LCR 178 IP5000-UG-VA Version A, October