Toshiba IP5000 manual To Use a One Touch Button, Setting/Changing a Personal Speed Dial Code

	User Programming
	One Touch Buttons
Table 13	Special Characters
Entry	Meaning
*+	Indicates “stop.” The One Touch button blinks rapidly and stops the delivery of
	the remaining digits in the string until it is pressed again. Multiple “stops” can be
	programmed into one string.

Pause (1~9) seconds. If you need to pause longer than nine seconds, enter

*additional pause escape sequences. For example, to insert a 17-second pause,

(1~9) enter *9*8. The display of a pause in the Speed Dial Number shows a “P”

without specifying the duration. In this example, you would see “PP.”

***

*# #

Example of Special Character Usage

To create a One Touch for Park and Page under one button, program the following sequence under the One Touch button.

CNF #33*** FB1 #30

CNF – puts the caller on hold and gets new dial tone. #33 – code to park call

**– this special character outputs a single * which will select an available orbit and display the selected orbit on the phone.

* – This special character is a Stop. The dial string pauses and enables the user to view the selected orbit on the display. The dial string will restart from this point when the One Touch button is pressed again.

FB1 – gets new dial tone on the PDN

#30 – code for All Call Page which allows the user to page the location of the orbited call.

To Use a One Touch Button

Press the One Touch button.

Setting/Changing a Personal Speed Dial Code

See “Storing a System/Station Speed Dial Number” on page 72.

Strata CIX IP5000-series Telephone UG 10/08 99