Xerox 480 ST, 490 ST manual Parallel Port, To specify parallel port settings

	Parallel Port
NOTE	If the parallel port is not in service, this page is unavailable.

To specify parallel port settings:

1.Open your Web browser and enter the TCP/IP address of the Document Centre in the Address or Location field.

2.Click the Properties tab or click Properties in the directory tree.

3.Select Connectivity, then select Physical Connections in the directory tree.

4.Select Parallel in the directory tree.

	5.	Select Connection Enabled to enable the parallel port.
	6.	Type a Time-out in seconds. Valid entries are from 1-30 sec-
		onds.
	7.	Click Apply New Settings to accept the changes or Restore
		Settings to return the settings to their previous values.
NOTE
	The settings are not applied until you restart the Document Centre.

16. Internet Services

Xerox Document Centre System Administration Guide Page 16 - 47