Xerox 490 ST, 480 ST manual Go to the Document Centre, Enter the Tools pathway

Go to the Document Centre and...

1.Enter the Tools pathway.

a)Press the Access ( or ) button.

b)On the keypad enter 1111 or the current password. Press the Enter button when finished. The Touch Screen will be used for the remainder of the data entry, unless instructed otherwise.

c)Press the Go to Tools button.

2.Enter the Access and Accounting menus.

a)Press the Access and Accounting button.

b)Press the Authentication Mode button.

3.Enable Network Accounting.

a)Press the Network Accounting button.

b)Press Save to retain the settings and continue.

Page 18 - 4 Xerox Document Centre System Administration Guide