Xerox 490 ST To Add IP Addresses to the Trap Destination Addresses list, Click Add IP Address

9.Select to enable Authentication Failure Generic Traps.

10.Click Apply New Settings to accept the changes, Restore Set- tings to return the settings to their previous values, or Default Settings to return the settings to their default values.

To Add IP Addresses to the Trap Destination Addresses list:

1.Open your Web browser and enter the TCP/IP address of the Document Centre in the Address or Location field.

2.Click the Properties tab or click Properties in the directory tree.

3.Select Connectivity, then select Protocols in the directory tree.

4.Select SNMP Configuration in the directory tree.

5.Click Add IP Address.

6.Enter the IP Address of the SNMP manager that will receive traps.

Page 16 - 60 Xerox Document Centre System Administration Guide