Xerox 480 ST, 490 ST manual Tcp/Ip, To specify TCP/IP settings

TCP/IP

To specify TCP/IP settings:

1.Open your Web browser and enter the TCP/IP address of the Document Centre in the Address or Location field.

2.Click the Properties tab or click Properties in the directory tree.

3.Select Connectivity, then select Protocols in the directory tree.

4.Select TCP/IP in the directory tree.

5.Select Protocol Enabled to enable TCP/IP.

CAUTION:Disabling TCP/IP will affect NetBIOS/IP, LPR/LPD, FTP, SNMP, and Raw TCP/IP printing. Internet Services will not be available until TCP/IP is enabled from the control panel of the Document Centre.

6.If your Document Centre has an enabled token ring card, select either Ethernet or Token Ring from the Physical Connection drop-down list.

16. Internet Services

Xerox Document Centre System Administration Guide Page 16 - 55