Xerox 490 ST, 480 ST manual Xerox Document Centre System Administration Guide

7.Set Maximum Connections and Timeout.

a)Press the Connections button.

b)Touch the Maximum Connections soft button on the Touch Screen and on the keypad enter the desired maximum connection number between 10 and 30. It is recommended that this value should be set at the default.

c)Touch the Connection Timeout soft button on the Touch Screen. On the keypad enter the desired number of seconds between 1and 32,767 Press Save to exit the connections screen.

8.Exit the Tools Menu.

a)Press the Exit Tools button. The printer will store the settings you have made.

9.Print a Configuration Report page from your printer to use in the remainder of the installation.

a)Repeat Steps 2a and 2c.

b)Select System Setting.

c)Select Configuration Report.

d)Select Print Configuration Report Now.

e)Press Cancel.

10.Prepare for print driver installation.

a)From the documentation package supplied with your printer, retrieve the CentreWare Network Services CD-ROMand the document entitled CentreWare Net- work Services Guide. Proceed to the next section of this procedure called Go to a Workstation and...

Page 8 - 4 Xerox Document Centre System Administration Guide