Xerox 480 ST, 490 ST manual Change the Printing jobs and the Accepting jobs fields

	3.	Configure Access Lists and Print Destination.
		a)	The Access Lists screen will be displayed.
		b)	Press the F10 key to accept the defaults.
		c)	The Add a Destination screen will be displayed.
		d)	Select PCPrint and press Enter.
		e)	From the Destination Attributes Screen, enter the
			Document Centre user name as the PCPRINT ST name
			and Description, and then press the F10 key.
NOTE
	The PCPrint ST name must be the same as the user name created
	and must also match the Street Talk (user) Name entered at the
	printer.
		f)	The Output Strings Screen will be displayed. Press the
			F10 key to accept the defaults displayed on the screen.
		g)	The Enable Strings Screen will be displayed. Press the
			F10 key to accept the defaults displayed on the screen.
		h)	Select No and press Enter when you are prompted to
			add another destination.
	4.	Enable the Print Queue.
		a)	The Print Queue Status Screen will be displayed.
		b)	Change the Printing jobs and the Accepting jobs fields
			to Yes and then press the F10 key.
		c)	A message will be displayed stating that the printer is
			ready to accept and print jobs. Press the F10 key to
			continue.
		d)	The Manage A Service screen will be displayed.
		e)	Press the Escape Key to return to the Manage Services
			main menu.
	5.	Power off and power on the Document Centre for these setup
		options to take effect.

Banyan VINES	Network
15.

Xerox Document Centre System Administration Guide Page 15 - 5