Xerox 480 ST, 490 ST manual Set Up Scanning NetWare Before You Start

Set Up Scanning - NetWare

Before You Start

Prior to starting the installation procedure, perform the following:

1.Ensure that the Document Centre is connected, configured, and operating correctly as a printer.

2.Use the SYSCON utility for NetWare 3.x, or NWADMIN for NetWare 4.x to create a user account on the file server for the scanner.

3.Create a directory on the file server to be used as a repository for scanned files. Give the scanner user account all access rights to this directory, except supervisor. The repository name cannot exceed 8 characters.

NOTE Refer to the NetWare documentation for additional information.

When a document is scanned, the Document Centre logs into the scanner user account with the user name and password, transfers the file to the repository in the server, and then logs out.

NOTE The Document Centre supports TIFF and PDF File Formats.

Scan Setup without	CentreWare
20.

Xerox Document Centre System Administration Guide Page 20 - 15