Xerox 480 ST, 490 ST manual Go to the workstation

Go to the workstation and...

	1.	From the desktop click the Start button on the Task Bar.
	2.	Select the Programs entry in the menu.
	3.	From the cascade menu select the Xerox CentreWare entry.
	4.	On the next cascade menu select the Device Admin Wizard.
	5.	The Device Admin Wizard will start.
	6.	Follow the instructions on each Device Admin Wizard
		Screen to setup the Document Centre on your network.
		Context sensitive help is available for each step.
NOTE	You will be asked for a password, enter “1111” (or the current
	Admin password for your printer that you would enter from the
	keypad), then click OK.
	7.	The Device Admin Wizard will complete the installation by
		writing the settings to the Document Centre and the Novell
		Server.

Go to the Document Centre and...

1.Power off and power on the Document Centre so the setup

selections will take effect.

2. Wait a MINIMUM of 7 minutes for the printer to reset.

CentreWare Device	Admin Wizard
4.

Xerox Document Centre System Administration Guide Page 4 - 3