Xerox 480 ST, 490 ST manual TCP/IP Settings screen, Press the TCP/IP Line Printer button

		c)	Repeat this process for the IP Gateway address. When
			finished press Save to record the changes and exit to the
			TCP/IP Settings screen.
		d)	Press the Close button.
	10.	Enable LP and LPR printing.
		a)	Press the TCP/IP - Line Printer button.
		b)	Press the Enable button.
NOTE
	While you can change the port number at which your Document
	Centre will accept lpr print jobs it is recommended that you do this
	ONLY with extreme caution as most lpr spoolers are set to send
	print jobs to the default port.
		c)	If you wish to change the lpr port for your printer press
			the Port Number soft button and enter the desired port
			number at the keypad. Press Save.
		d)	Press the Close button.
	11.	Enable HTTP/IPP
		a)	Press the HTTP/IPP button. At the next screen press the
			Enable button. Then press Save.
		b)	Press the Exit Tools button.
	12.	Verify printer settings.
		a)	Print a Configuration Report page to verify the TCP/IP
			information was assigned correctly. (see step 7.)
NOTE
	Update the lease time (if necessary) at the DHCP or BOOTP server
	depending on your printer usage patterns. Consult your server
	documentation for details.
NOTE
	If your RARP Sever does not dynamically update its etc/ethers and
	etc/hosts files with a host name, you need to do this manually.
	Consult your RARP or BOOTP server documentation for details.

3. Dynamic/Static IP Addresses and WINS

Xerox Document Centre System Administration Guide Page 3 - 5