Xerox 490 ST, 480 ST manual Xerox Document Centre System Administration Guide

3.Review the NetWare Settings: area of the page and verify at the User Interface these items:

Ethernet or Token Ring (depending on which is being used) is ENABLED.

Frame Type matches the frame type of the Primary fileserver.

Primary File Server (for NetWare 3.1X only) is set to the name of the server that serves the print queue you have assigned to the printer. Setting the Primary Server is extremely important on large networks.

NDS Tree (for NetWare 4.X and 5.X NDS only) is set for the correct NDS tree name.

NDS Context (for NetWare 4.X and 5.X NDS only) is set for the correct NDS Context.

Print Server Name is set for the name selected for this printer to act as a print server.

Print Server Password is set correctly for this print server.

4.Print out another Configuration Report page to verify the items you modified were set and retained.

5.VERIFY that the NetWare print queue assigned to the printer exists, is accepting jobs, and has a Print Server attached. If the printer has not logged in, reboot the printer.

Page 17 - 6 Xerox Document Centre System Administration Guide