Xerox 480 ST, 490 ST manual Scan Templates, Network Scanning Services Guide to use the CentreWare

Scan Templates

The scan template is essentially a job ticket for the scanned job. The template is user-programmable, and contains parameters for the scanned document. The user can programme parameters such as one-sided or two-sided scanning, scanned image size, and the location on the file server where the file will be stored.

The Default Template

Adefault scan template (default.xst) is created during the installation of the scanning option and is stored on the Document Centre. It is available for all scanning installations.

It is selected at the Document Centre Control Panel Touch Screen to begin the scanning process.

NOTE	The Native scanning installations described in this guide provide
	only the default.xst template for all scanning users.
	In this environment, additional scan templates can easily be created
	using only Xerox’s CentreWare Internet Services, or the Xerox
	Network Scanners Utility. You MUST refer to the Internet
	Services Guide to create templates with Internet Services, or the
	Network Scanning Services Guide to use the CentreWare
	Template Utility.

Scan Setup without	CentreWare
20.

Xerox Document Centre System Administration Guide Page 20 - 7