Xerox 480 ST, 490 ST Press the Microsoft Networks button, Press the Transport and Media button

Go to the Document Centre and...

1.Connect your Document Centre to the network with the appropriate cabling.

2.Enter the Tools pathway.

a)Press the Access ( ) button.

b)On the keypad enter 1111 or the current password. Press the Enter button when finished. The Touch Screen will be used for the remainder of the data entry, unless instructed otherwise.

c)Press the Go to Tools button.

3.Enter the Network Setup menus.

a)Wait for the screen to refresh and press the Connectivity and Network Setup button.

b)Wait for the screen to refresh and press the Network Setup button.

c)Press the Microsoft Networks button.

4.Enable the Transport and Media.

a)Press the Transport and Media button.

b)Press the Enable button. If Physical Media buttons appear, select either IP/Ethernet or IP/Token Ring. Press Save.

5.Set the NetBIOS Host Name.

a)Press the Workgroup and Host button.

b)Press the SMB Host Name (this is the same as the Net- BIOS host name) button.

c)When the soft keypad appears, type the host name EXACTLY as you want it to appear with correct case. When finished press the Save button to record the changes and exit to the Workgroup and Host Screen.

3. Dynamic/Static IP Addresses and WINS

Xerox Document Centre System Administration Guide Page 3 - 11