Xerox 480 ST, 490 ST manual Enter the Server IP Address or Host Name and optional, Port

	2.	Enter the Server IP Address or Host Name and optional
		Port.
	3.	Enter any Optional Information required.
		a)	Search Directory Root.
		b) The LDAP server Login Name and Password if
			required.
		c) Maximum Number of Search Results.
		d)	Search Timeout.
	4.	Click the Apply New Settings button to implement any
		changes. If required, Click the Restore Settings button to
		cancel any changes made and return to the previous values.
	5.	When prompted, enter admin (lower case) into the User
		Name field and 1111 or the current password into the
		Password field and select OK.
NOTE
	The Document Centre will display search results for the Internal
	Address Book as defined by the LDAP configuration. For example,
	an LDAP server can return a search enquiry "And" as "Andrew
	Smith" when the result "Andrews, James" may have been expected.
	The <lastname, firstname> or,<firstname, lastname> display
	behaviour is controlled by the LDAP server and not the Document
	Centre.

Network Authentication / Internal Address Book

(LDAP) Configured

If a user has successfully logged into a device with Authentication enabled, the Document Centre 490/480/470/460 ST will attempt to automatically match the user’s login name to their E-mail address. The user’s E-mail address will then be used to populate the "From" E-mail address field. This enables recipients of E-mail jobs to identify the originator of the E-mail job.

21. E-mail

Xerox Document Centre System Administration Guide Page 21 - 11