Xerox 480 ST, 490 ST manual Go to the Server/Workstation, To create a LPR Printer

Go to the Server/Workstation and...

NOTE	This procedure assumes that any TCP/IP components necessary for
	network installation have already been assigned to the Document
	Centre. If these components have not been configured, please refer
	to the appropriate information contained within the section entitled
	Dynamic/Static IP Addresses & WINS before continuing further.
	1.	Verify the correct software is loaded.
		a)	At the Desktop, right mouse click the My Network
			Places icon and select Properties. Right mouse click on
			the Local Area Connection icon and verify that the
			Internet Protocol (TCP/IP) protocol has been loaded.
	2.	Add the printer.
		a)	Open Control Panel and double click the Printers icon.
		b)	Verify that Network Printer is selected and click Next.
		c)	The Locate Your Printer screen will appear.
		d)	Follow the steps to Create a LPR printer OR Create an
			IPP printer in the right column.
	To create a LPR Printer
		a)	Select Local Printer; deselect Automatically detect
			and install my Plug and Play printer. Click Next.
		b)	Select Create a new port and choose Standard
			TCP/IP port from the pull-down menu. Click Next
			twice.
		c)	Enter the Printer Name or its IP address. The Printer
			Name can be either the Host Name or the SMB Host

Name as shown on the configuration report, depending on the name resolution used by your network (WINS or DNS). The Port Name is automatically filled in for you but you can change it if you want to. Click Next.

Windows 2000 LPR	and IPP Printing
10.

Xerox Document Centre System Administration Guide Page 10 - 3