Xerox 480 ST, 490 ST manual How to Connect to Ethernet or Token Ring Networks, Speed

2.How to Connect to Ethernet or Token Ring Networks

Before You Connect to a 100BaseT Ethernet Network

The Document Centre Ethernet Interface has speed settings of 10Mbps (10 Megabits per second), 100Mbps (100 Megabits per second) and Auto (AutoSensing). If your network has hubs or concentrators that have Auto-Sensing enabled, it is possible that if the Document Centre is set to Auto, the hub/concentrator will not arbitrate to the correct speed.

Before you connect the printer to your network, perform the procedure on the next page entitled How to set the Ethernet

Speed.

Connect to	Token Ring
2. How to	Ethernet or

Xerox Document Centre System Administration Guide Page 2 - 1