Xerox 490 ST, 480 ST manual Output Image Quality, Entitled Configure your printer

Output Image Quality

•Multi-Page TIFF can be enabled using Xerox CentreWare Internet Services. When Multi-Page TIFF is enabled, a single TIFF file will be created for a multi-page document. This sin- gle TIFF file will contain all the pages of the document. An

.XSM folder is not created when scanning in the Multi-Page TIFF mode. A single TIFF file and a log file (.xst) are stored in the repository for each multi-page document that is scanned.

CAUTION	Not all applications will accept the Multi-Page TIFF format.
	Applications that do not support Multi-Page TIFFs will typically
	import and display only the first page of the document.
	If you will be using CentreWare Internet Services to complete
	the installation, perform these steps.
	A. Refer to the chapter entitled Internet Services in this
	document.
	B. Follow the instructions located in the section of the chapter
	entitled Configure your printer.
	C. Finally, refer to the section entitled Scanning Documents of
	the Internet Services Guide, and follow the instructions
	there.

Page 20 - 26 Xerox Document Centre System Administration Guide