Xerox 490 ST, 480 ST manual Go to the Document Centre

Go to the Document Centre and...

1.Connect your Document Centre to the network with the appropriate cabling.

2.Access the Tools pathway.

a)Press the Access ( or ) button.

b)On the keypad enter 1111 or the current password. Press the Enter button when finished. The Touch Screen will be used for the remainder of the data entry, unless instructed otherwise.

c)Press the Go to Tools button.

3.Enable the AppleTalk protocol.

a)Wait for the screen to refresh and press the Connectivity and Network Setup button.

b)Wait for the screen to refresh and press the Network Setup button.

c)Press the AppleTalk button.

d)Press the Protocol and Media button.

e)Press the Enable button. If Physical Media buttons appear, select either Ethernet or Token Ring. Press Save.

Page 14 - 2 Xerox Document Centre System Administration Guide