Microsoft TCP/IP Networks, Before You Start

9. Microsoft (TCP/IP) Networks

NOTE	Your Document Centre now has DHCP, LPR, and NetBIOS over
	the IP protocol enabled by default. If you have a DHCP server and
	it is set to provide host name, IP address, Gateway address, and
	Subnet Mask, the Document Centre TCP/IP information will be
	configured on initial boot.

	To enable 100BaseT or a Token Ring interface, refer to Chapter 2
	How to Connect to Ethernet or Token Ring Networks to
	configure the Speed and Source Routing settings for your
	environment.
	For information on how your printer can connect to a BOOTP
	server, or a RARP server to be assigned an IP address dynamically,
	refer to the chapter in this document entitled Dynamic/Static IP
	Addresses & WINS Information in regards to static IP address
	configuration may be found within that section as well.

Page 9 - 1