Xerox 490 ST, 480 ST Set Up Scanning FTP File Transfer Protocol Before you start, Set up options

Set Up Scanning - FTP (File Transfer Protocol)

Before you start

Prior to starting the installation procedure, perform the following:

1.Ensure that the Document Centre is connected, configured, and operating correctly as a network printer.

2.Ensure that FTP Services are running on a platform on the network. If FTP Services is running on a Windows NT server, ensure that Allow Only Anonymous Connections is NOT selected.

3.Create a user account for the scanner.

If the account is created on a Windows NT server, select User Cannot Change Password and Password Never Expires when the password is set, and select Logon Locally under User Rights.

4.Create a directory to be used as a repository for scanned files.

If the directory is created on a Windows NT server, enter the scan user name in the Alias box and select Access Read and Write.

Set up options

There are two procedures that can be used to successfully set up scanning. Read the information below and choose the procedure that you will use to complete the installation:

•Set Up Scanning

To complete the native implementation of scanning for your network environment, go to the section of this chapter titled Set Up Scanning now.

•Use Xerox CentreWare Internet Services

Page 20 - 24 Xerox Document Centre System Administration Guide