Xerox 480 ST, 490 ST To edit IP or IPX Trap Destinations, To delete IP or IPX Trap Destinations

NOTE	Authentication Failure Generic Traps must be enabled on the
	SNMP Properties Configuration Page before you can select it.

11.Click Apply New Settings to accept the changes or Restore Settings to return the settings to their previous values.

To edit IP or IPX Trap Destinations:

1.Open your Web browser and enter the TCP/IP address of the Document Centre in the Address or Location field.

2.Click the Properties tab or click Properties in the directory tree.

3.Select Connectivity, then select Protocols in the directory tree.

4.Select SNMP Configuration in the directory tree.

5.Select an IP or IPX address in the Trap Destination Addresses list.

6.Click Edit.

7.Make any changes to Traps to be Received.

8.Click Apply New Settings to accept the changes or Restore Settings to return the settings to their previous values.

To delete IP or IPX Trap Destinations:

1.Open your Web browser and enter the TCP/IP address of the Document Centre in the Address or Location field.

2.Click the Properties tab or click Properties in the directory tree.

3.Select Connectivity, then select Protocols in the directory tree.

4.Select SNMP Configuration in the directory tree.

5.Select one or more IP or IPX address in the Trap Destination Addresses list.

6.Click Delete.

7.Click OK to confirm the deletion.

16. Internet Services

Xerox Document Centre System Administration Guide Page 16 - 63