Xerox 480 ST, 490 ST manual Who Should Use This Guide, Network Scanning Services Guide guide now

Who Should Use This Guide

	This chapter is a companion to the Network Scanning Services
	Guide and is intended to be used by System Administrators who are
	setting up network scanning without using CentreWare Network
	Scanning Services. CentreWare Network Scanning Services is
	intended for use on Windows based workstations.
	There are two other options for setting up scanning services:
	• Setting up Native Scanning
	• Setting up Scanning Using CentreWare Internet Services
	Both of these set up options require the use of procedures in this
	guide. For Setting up Scanning Using CentreWare Internet
	Services, you will need to complete some processes, and then refer
	to the Internet Services Guide to complete the set up. All of the
	procedures for setting up Native Scanning are included in this
	section.
	There are two options for file transfer if you are setting up Native
	Scanning or Scanning Using CentreWare Internet Services.
	• Setting Up Scanning - NetWare (NCP)
	• Setting Up Scanning - FTP (File Transfer Protocol)
	Procedures for both of these file transfer options are contained in
	this guide.
NOTE
	If you will be using Xerox’s CentreWare Network Scanning
	Services to set up scanning on the Document Centre, refer to the
	Network Scanning Services Guide guide now.
	To use the procedures in this guide effectively, you must have
	experience working in a network environment. You must also have
	access to the network and possess Supervisor (Administrator) rights.
	You may also require documentation provided by network and
	client workstation vendors.

Scan Setup without	CentreWare
20.

Xerox Document Centre System Administration Guide Page 20 - 3