Microsoft Windows NT 4.X Server Network TCP/IP

11.Microsoft Windows NT 4.X Server Network (TCP/IP)

NOTE	Your Document Centre has DHCP enabled by default. If you have
	configured a DHCP server with TCP/IP information, you can
	connect your Document Centre to your network and it will retrieve
	its TCP/IP information from the DHCP server when it is turned on.

	To enable 100BaseT or a Token Ring interface, refer to Chapter 2
	How to Connect to Ethernet or Token Ring Networks to
	configure the Speed and Source Routing settings for your
	environment.
	If you are using DHCP, perform Steps 1 through 8b contained
	within the Dynamic Addressing portion of the Dynamic/Status IP
	Address Assignment & WINS section but DO NOT change any
	values. Then read the note before step 9 and determine if you wish
	to change the lpr port number. After choosing, complete the
	remainder of the procedure.

Page 11 - 1