Xerox 490 ST Microsoft Networking, Physical Connection is read only if Transport is NetBIOS/IP

Microsoft Networking

1.Open your Web browser and enter the TCP/IP address of the Document Centre in the Address or Location field.

2.Click the Properties tab or click Properties in the directory tree.

3.Select Connectivity, then select Protocols in the directory tree.

4.Select Microsoft Networking in the directory tree.

	5.	Select Protocol Enabled to enable Microsoft Networking.
	6.	Select Ethernet or Token Ring from the Physical Connection
		drop-down list.
NOTE	Physical Connection is read only if Transport is NetBIOS/IP.
	7.	Select TC/PIP or NetBIOS/NetBEUI from the Transport
		drop-down list.
NOTE	Transport is NetBEUI if TCP/IP is not enabled.

Page 16 - 64 Xerox Document Centre System Administration Guide