Xerox 480 ST, 490 ST Go to the workstation, Section of the Document Centre 490/480/470/460 Refer

Go to the workstation and...

NOTE	This procedure assumes that any TCP/IP components necessary for
	network installation have already been assigned to the Document
	Centre. If these components have not been configured, please refer
	to the appropriate information contained within the section entitled
	Dynamic/Static IP Addresses & WINS before continuing further.
	1.	Verify that the TCP/IP protocol stack is loaded.
	2.	Use the CentreWare Network Services CD-ROM to install
		print drivers. Details for this are found in the document sup-
		plied with your printer entitled CentreWare Network Ser-
		vices Guide.
	3.	Connect the printer that you just created to the shared
		resource on the server.
	4.	Open an application on the workstation and print a test page
		to verify operation.
	5.	Check your test job for quality and use the problem solving
		section of the Document Centre 490/480/470/460 Refer-
		ence Guide for resolving print defects.
	6.	Repeat this Go to the workstation and... procedure for each
		workstation on the network that will print to the printer.

Microsoft Windows	4.X Server Network
11.	NT

Xerox Document Centre System Administration Guide Page 11 - 5