Xerox 490 ST manual Default Template, To create a default template for use with Internet Services

Default Template

The Default Template Properties Page allows a Network Administrator to modify the default template values. Information set on this page is used to create any new templates on the Document Centre.

The Network Administrator can revert from the changed template to the factory default settings by clicking Restore to Factory Defaults.

NOTE	For information on editing distribution templates for scanning
	using Internet Services, see the Scanning Documents section of this
	chapter.
	To create a default template for use with Internet Services:
	1.	Open your Web browser and enter the TCP/IP address of the
		Document Centre in the Address or Location field.
	2.	Click the Properties tab or click Properties in the directory
		tree.
	3.	Select Services, then select Distribution Templates in the
		directory tree.
	4.	Select Default Template in the directory tree.

Page 16 - 90 Xerox Document Centre System Administration Guide