Xerox 480 ST, 490 ST manual Connectivity, Physical Connections, To set an Ethernet speed

Connectivity

This Connectivity section shows the available options for connecting your Document Centre to your network. Connectivity allows you to view and modify network connections and protocols using your browser and Internet Services GUI. For complete information on installing and setting up your Document Centre, see the additional administrative documentation that came with your Document Centre.

Physical Connections

Physical connections are the hardware and cabling that attach Document Centres to a network. You can configure Ethernet, parallel port, or token ring options from the Physical Connection pages of Internet Services.

Ethernet

To set an Ethernet speed:

1.Open your Web browser and enter the TCP/IP address of the Document Centre in the Address or Location field.

2.Click the Properties tab or click Properties in the directory tree.

3.Select Connectivity, then select Physical Connections in the directory tree.

16. Internet Services

Xerox Document Centre System Administration Guide Page 16 - 45