Protocol not running, Remote directory lock failed

Problem	Corrective Action

Protocol not running	A user tried a scanning operation with a
	destination on the NetWare server.
	• The NetWare protocol is not currently
	enabled. Enable it.

Remote directory lock failed	The repository that you are attempting to
	send a job into with a scanning operation is
	in use by another Document Centre.
	Check the following:
	• The specified volume name is
	invalid.
	• The specified filing destination (path)
	is invalid.
	• The destination disk is full, prevent-
	ing the creation of the remote direc-
	tory.

Page 20 - 38

Xerox 490 ST, 480 ST manual Protocol not running, Remote directory lock failed